Low Profile Car Ramps Set 3000kg

If you're rolling in a slammed ride, sooner or later you’re gonna need to jack it up and get some work done.

But with barely any ground clearance, the last thing you want is your trolley jack smashing into the sills or fibreglass lip. That’s where a set of super low profile car ramps makes all the difference.

Just drive on and gain an extra 68mm of clearance—plenty to safely reach your jacking points without the hassle. It doesn’t get easier than that, and these ramps are built for the job.

They’re lightweight, stay put when you drive up, and feature a raised edge to stop you going too far. Simple, safe, and a must-have for any low car.

Package includes: 2x Low Profile Ramp

Specifications:

• Dimensions: L700mm W200mm H80mm
  
• Material: Heavy Duty Polypropylene Plastic
  
• Colour: Black
  
• Rated Load Capacity Per Pair: 3000kg
• Approximate Weight: 1.7kg (Each)

Safety precautions for correct car ramp use:

1. Always use car ramps on a hard level surface, such as concrete. Car ramps should always be used in pairs.
2. Confirm that the load / car to be applied does not exceed the working load limit of the vehicle ramps.
3. Conduct a pre-operational check of the car ramps to ensure no damage or broken components.
4. Check that no part of the underbody of the vehicle will foul as the car ramps are positioned.
5. Turn the wheels to a straight ahead position and place the car ramps against the tyres in such a way that each ramp is in line with the respective wheel.
6. Slowly drive the vehicle onto the ramp platform with guidance from a person outside the vehicle.
7. Once safely positioned on the car ramp apply the park brake of the vehicle.
8. Place a wheel chock under at least one of the wheels which is on the ground so that the vehicle cannot accidently roll off the ramps.
9. Car ramps should never be modified or accessories added.