Master Fuel Injection Pump Pressure Tester Kit

If you spend lots of time working on your car or simply tinkering with vehicles, then this tool is a must have in your garage.

• Test gasoline fuel pump pressure on most fuel injection equipped vehicle
  
• Gauge calibrated from 0-140 PSI (0-10 bar)
  
• Indicates if fuel pump is defective or inconsistent in pressure flow
  
• Includes assorted hoses, fittings and clamps to work on most vehicles

Kit Includes:

• 2" Cut Hose — 1/2" I.D.
  
• 3" Cut Hose — 1/4" I.D.
  
• 3" Cut Hose — 3/8" I.D.
  
• Quick Coupler Plug with 1/4" Hose Barb
  
• Bent Tubing with 7/16" inverted flare nut
  
• Adapter — Female M16×1.5 one end and 7/16 tube fitting other end
  
• Adapter — Female M14×1.5 one end and 7/16 tube fitting other end
  
• Adapter — 1/4"-18 and M18×1.5
  
• Adapter — M8×1.0 Female and M12×1.5 Male
  
• Adapter — M10×1.0 Female and M12×1.5 Male
  
• Volvo adapter; 14 mm LH–Jetronic
  
• Adapter for Geo Storm and Isuzu I–Tec systems
  
• Adapter — Ford EFI
  
• Adapter — Ford CFI
  
• Manifold with quick coupler plug
  
• Adapter for Standard Schrader Valve
  
• Adapter for Small Schrader Valve (Ford)
• Adapter M8×1.0 Male — M12×1.5 Male with O-ring
  
• Adapter M10×1.0 Male — M12×1.5 Male with O-ring
  
• Adapter M8×1.0 Male — M12×1.5 Male with O-ring
  
• Connecting Hose and Valve Assembly for Bosch CIS
  
• Straight tubing with 7/16" inverted flare nut
  
• Bent tubing with 7/16" inverted flare nut & M16×1.5 nut & O-ring
  
• Adapter — Male M16×1.5 and 7/16 tube fitting, plus O-ring
  
• Connecting Hose Assembly for GM TBI
  
• Adapter – Male M14×1.5 and 3/8" Tube fitting, plus O’ ring
  
• Adapter–Banjo Bolt M6×1.0 with O’ring
  
• Adapter–Banjo Bolt M8×1.0 with nylon washer
  
• Adapter–Banjo Bolt M10×1.0 with nylon washer
  
• Adapter–Banjo Bolt M12×1.25 with nylon washer
  
• Adapter–Banjo Bolt M12×1.5 with nylon washer
  
• Gauge (3 ½") & ¼ ft. Hose, Valve, 6 ft. Tubing assembly (100 PSI)
  
• Gauge (2½"), and 16" hose assembly only, no valve, no tubing (100 PSI)
  
• Relief valve, & Tubing assembly